The Prince Nymph. Also know as the Brown Fork Tail. The most prolific steelhead catching fly of the past season. Fished on a dead drift. The weighted Prince. I like a brass bead and wrapped lead wire underneath. A drop or two of Zap-A-Gap will cement it in place. Two brown goose biots are wrapped on as a forked tail with red thread. An oval silver tinsel is attached to the far side to be wrapped as a rib. A length of strong, fine wire is attached to the near side. The thread is advanced to the front of the hook. 15 pieces of natural peacock herl are attached there at their fine tips. The thread is wrapped back to the base of the tail over the herl. At this point the red thread is wrapped around the full length of the peacock herl strands. The herl and the thread are twisted together to form a strong rope. Then the “rope” is wrapped to the front of the hook forming a tapered body. End the peacock herl body behind the brass bead head. Be sure to separate the extra herl from the thread. Clip the herl leaving a little free space behind the bead. Wind the oval silver tinsel forward over the body with 5 or 6 equal spaced wraps to the front. Counter wind the strong wire over the tinsel to the front. Bind down the tinsel and wire with several taunt wraps of the red thread. Trim the excess tinsel and wire ends. Attach a prepared brown feather hackle to the little space left between the body and the bead head. The fibers of the hackle can be folded to help slant rearward. The brown hackle is wrapped once or twice to sweep rearward as a collar. Two white goose biots are attached to the top just behind the bead as wings. To securely attach the wings, I like to fold/bend the cut ends rearward and cover them with the final wraps of thread. Build up a little red space with the tread behind the bead, whip finish and cut the thread. Several coats of cement (Sally Hansens or Zap-A-Gap) are applied to the thread. Notice the folded end of the white goose biot poking out at the base of the wing. A very attached wing that will not slip off.
More January reflecting. Thinking back on August when the Rogue River ran high but without the stain and cold of January runoff. Sure the river will continue it’s winter antics but the conditions overall are improving as we near February.
Here’s a lucky day during late August 2016 when a Hobo Spey and Midnight Rainbow Carpetbagger Stonefly Nymph were the successful flies to use.
Considering all the snow, ice, rain and high water of early January this year it is good to reflect back on the warm days and hot fish of summer on the Rogue River, Oregon. Early morning wet wading. Oh what a treat. It will be a while until we can do this again. In the meantime keep an eye on the weather and river flow. Winter steelhead fishing is next on the Rogue agenda, and with the high water flows, fish could be trickling in sooner than expected.
A diminutive Brown Fork Tail Prince Nymph working well. I like the pattern with a slight, yellow-brown tail. Today I was using the pattern on the size 10 hook.